Domoticz/Overkapping
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Update Overkapping.ino

Browse Source 
Temp + Humidity + Baro implemented
This commit is contained in:
Frank 2022-08-19 16:50:04 +02:00
parent 0d04297a29
commit 8b92484ce6
1 changed files with 64 additions and 12 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

76
Overkapping.ino
View File

@ -4,8 +4,16 @@
#include <ESP8266WiFi.h> #include <ESP8266WiFi.h>
//#include <ESP8266HTTPClient.h> //#include <ESP8266HTTPClient.h>
#include <Wire.h>
#include <PubSubClient.h> #include <PubSubClient.h>
#include <ArduinoJson.h> #include <ArduinoJson.h>
#include <RCSwitch.h>
#include <Adafruit_Sensor.h>
#include <Adafruit_BMP280.h>
#include "Adafruit_Si7021.h"
#define idx_temp 2269
#define BUZZER_PIN D8 #define BUZZER_PIN D8
@ -20,9 +28,12 @@ const char* mqtt_pwd = "MQTT&Domoticz";
WiFiClient espClient; WiFiClient espClient;
PubSubClient client(espClient); PubSubClient client(espClient);
#include <RCSwitch.h>
RCSwitch mySwitch = RCSwitch(); RCSwitch mySwitch = RCSwitch();
Adafruit_BMP280 bme; // I2C
Adafruit_Si7021 sensor = Adafruit_Si7021();
long lastMsg = 0; long lastMsg = 0;
char msg[100]; char msg[100];
int value = 0; int value = 0;
@ -140,18 +151,33 @@ void setup() {
// Transmitter is connected to Arduino Pin #10 // Transmitter is connected to Arduino Pin #10
mySwitch.enableTransmit(D4); mySwitch.enableTransmit(D7);
// Optional set protocol (default is 1, will work for most outlets) // Optional set protocol (default is 1, will work for most outlets)
mySwitch.setProtocol(1); mySwitch.setProtocol(1);
// Optional set pulse length. // Optional set pulse length.
mySwitch.setPulseLength(395); //Orgineel op 390 !! mySwitch.setPulseLength(390); //Orgineel op 390 !!
// Optional set number of transmission repetitions. // Optional set number of transmission repetitions.
mySwitch.setRepeatTransmit(2); mySwitch.setRepeatTransmit(5);
Serial.println(F("RF Init done...")); Serial.println(F("RF Init done..."));
if (!bme.begin())
{
Serial.println("Could not find a valid BMP280 sensor, check wiring!");
while (1);
}
if (!sensor.begin())
{
Serial.println("Did not find Si7021 sensor!");
while (true);
}
} }
void loop() { void loop() {
@ -170,18 +196,16 @@ void loop() {
} }
long now = millis(); long now = millis();
if (now - lastMsg > 20000) if (now - lastMsg > 60000)
{ {
update_temp();
lastMsg = now; lastMsg = now;
++value; ++value;
} }
} }
//MQTT receive //MQTT receive
void mqtt_callback(char* topic, byte* payload, unsigned int length) { void mqtt_callback(char* topic, byte* payload, unsigned int length) {
int svalue1, loc, StepperTarget; int svalue1, loc, StepperTarget;
@ -265,7 +289,35 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
mySwitch.send(14944539, 24); //OFF mySwitch.send(14944539, 24); //OFF
} }
} }
}
void update_temp()
{
float val_temp;
float val_hum;
float val_baro;
StaticJsonDocument<200> doc;
// Make our document be an object
JsonObject root = doc.to<JsonObject>();
root["command"] = "udevice";
root["idx"] = 2269;
root["nvalue"] = 0 ;
//svalue=TEMP;HUM;HUM_STAT;BAR;BAR_FOR
val_temp = sensor.readTemperature();
val_hum = sensor.readHumidity();
val_baro = bme.readPressure() / 100;
root["svalue"] = String(val_temp) + String(";") + String(val_hum) + String(";0;") + String(val_baro) + String(";0");
// root["svalue"] = "20;60;0;1024;0";
serializeJson(root, msg);
#ifdef DEBUG
Serial.println(msg);
#endif
client.publish("domoticz/in", msg);
} }