From fa381edb38f2419000673c20556558286d73bfa7 Mon Sep 17 00:00:00 2001
From: Frank <frankvanes@me.com>
Date: Thu, 30 Dec 2021 13:29:50 +0100
Subject: [PATCH] Create Bedlampje_Zolder.ino

---
 Bedlampje_Zolder.ino | 189 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 189 insertions(+)
 create mode 100644 Bedlampje_Zolder.ino

diff --git a/Bedlampje_Zolder.ino b/Bedlampje_Zolder.ino
new file mode 100644
index 0000000..8bb531e
--- /dev/null
+++ b/Bedlampje_Zolder.ino
@@ -0,0 +1,189 @@
+//Bedlampje Maud
+
+// Enable debug prints to serial monitor
+//#define MY_DEBUG 
+
+// Enable and select radio type attached
+#define MY_RADIO_NRF24
+//#define MY_RADIO_RFM69
+
+// Enable repeater functionality for this node
+//#define MY_REPEATER_FEATURE
+
+// Define a static node address, remove if you want auto address assignment
+#define MY_NODE_ID 18
+
+#define MY_RF24_CE_PIN 10 
+#define MY_RF24_CS_PIN 9
+
+// Set channel to 13
+//#define MY_RF24_CHANNEL 13
+
+#include <SPI.h>
+#include <MySensors.h>  
+#include <Bounce2.h>
+
+#define SLEEP_MODE false                      // Watt-value can only be reported when sleep mode is false.
+
+//Drukknoppen
+#define s1_PIN  4           // I/O pin switch 1
+
+//Uitgangen 
+#define l1_PIN 6            // I/O pin lamp Bedlampje
+
+#define l1_CHILD_ID 11      // Id Bedlampje
+#define l1_timed_CHILD_ID 19  // ID timed Bedlampje
+
+unsigned long currentTime;
+
+//unsigned long l1_timed_ON = 120000;
+unsigned long l1_timed_ON = 2700000;  //45 minuten ON
+//unsigned long l1_timed_ON = 180000;  //3 minuten ON
+unsigned long l1_start_ON;
+
+//Declare switch 
+Bounce s1_debouncer = Bounce();
+int s1_oldValue=HIGH;
+int s1_value;
+
+MyMessage l1_msg(l1_CHILD_ID,V_LIGHT);
+MyMessage timed_l1_msg(l1_timed_CHILD_ID, V_LIGHT);
+//MyMessage bed_msg(kast_CHILD_ID,V_LIGHT);
+
+bool lamp1 = false;
+bool l1_timed = true;
+
+unsigned long s_delta;
+
+bool val_init = false;
+
+void setup()  
+{  
+  
+  // Setup switch 1
+  pinMode(s1_PIN,INPUT);
+  // Activate internal pull-up
+  digitalWrite(s1_PIN,HIGH);
+   
+  // After setting up the button, setup debouncer
+  s1_debouncer.attach(s1_PIN);
+  s1_debouncer.interval(30);
+   
+  // Setup lamp 1 
+  pinMode(l1_PIN,OUTPUT);
+  digitalWrite(l1_PIN,LOW);  
+}
+
+void presentation() 
+{
+  // Send the sketch version information to the gateway and Controller
+  sendSketchInfo("Bedlampje Zolder", "1.0");
+  
+  present(l1_CHILD_ID, S_LIGHT);  
+  present(l1_timed_CHILD_ID, S_LIGHT);
+}
+
+
+void loop()     
+{ 
+  unsigned long now = millis();
+  //unsigned long currentTime = millis();
+
+  currentTime = millis();
+
+  if(!val_init)
+  {
+    wait(1000);    
+    request(l1_CHILD_ID, V_LIGHT);
+    wait(1000);
+    request(l1_timed_CHILD_ID, V_LIGHT);
+    val_init = true;
+  }
+
+  //Switch 1
+  s1_debouncer.update();
+  s1_value = s1_debouncer.read();
+  //If switch status changed
+  if (s1_value != s1_oldValue) 
+  {
+    if (lamp1==false)
+    {
+      //Switch lamp on
+      digitalWrite(l1_PIN,1);
+      lamp1 = true;
+      l1_start_ON = millis();
+      send(l1_msg.set(1));
+      Serial.println("Switch --> Bedlampje AAN !!");
+    }
+    else
+    {
+      //Switch lamp off
+      digitalWrite(l1_PIN,0);
+      lamp1 = false;      
+      send(l1_msg.set(0));
+      Serial.println("Switch --> Bedlampje UIT !!");
+    }
+    s1_oldValue = s1_value;
+  }
+
+  //When clock has made a complete round ;-)
+  if (l1_start_ON > currentTime)
+  {
+    l1_start_ON = currentTime; 
+  }
+
+  //If lamp1 = timed
+  if ((lamp1==true) && (l1_timed==true))
+  {
+    if ((currentTime - l1_start_ON) > l1_timed_ON)  
+    {
+      //Switch lamp off
+      digitalWrite(l1_PIN,0);
+      lamp1 = false;
+      send(l1_msg.set(0));
+      Serial.println("Timer --> Bedlampje UIT Timer !!");
+     }
+   }
+ }
+
+//Incomming message from Domoticz
+//void incomingMessage(const MyMessage &message) 
+void receive(const MyMessage &message)
+{
+    //Message of type V_LIGHT ?
+  if (message.type==V_LIGHT)
+  {
+    //Bedlampje
+    if (message.sensor==l1_CHILD_ID)
+    {
+   
+      if(message.getBool()==1)
+      {
+        Serial.println("Domoticz --> Bedlampje AAN !!");
+        digitalWrite(l1_PIN,HIGH);
+        lamp1 = true;   
+        l1_start_ON = millis();
+      }
+      else
+      {
+        Serial.println("Domoticz --> Bedlampje UIT !!");
+        digitalWrite(l1_PIN,LOW);
+        lamp1 = false;
+      }
+    }  
+
+    if (message.sensor==l1_timed_CHILD_ID)
+    {
+        if(message.getBool()==1)
+        {
+            Serial.println("Domoticz --> Timer enabled !!");
+            l1_timed = true;
+        }
+        else
+        {
+            Serial.println("Domoticz --> Timer disabled !!");
+            l1_timed = false;
+        }
+    }
+  }
+}